Description

Details

Reviews

Videos

Specs

The HAGz™ Bracket is a multi-use device. When attached to your trap chain it becomes an all-in-one trap stabilizer, stake swivel, and slide/drowner lock. It replaces a terminal swivel, has a built-in drowner lock, and stabilizes traps using the end of the trap frame. Supports most 1 1/2 size foot hold traps and smaller.

Click here for Product Instructions

Features:

Multi Use - Stabilizer, Stake Swivel and Slide/Drowner Lock
Stabilizes Coil, Jump and Long Spring Foot Hold Traps -Designed for 1.5 foot holds and smaller

Note:Fits Trap Frame Ends less than .129 thickness and .75 width (almost all 1.5 traps). Larger frame ends will work with minor filing.

Works on 3/8" rods (fiberglass or steel)
Weighs 1.36 Oz. and measures roughly 2.5"x1"
Made in USA
Improves efficiency and reduces overall costs.
Always ATTACHED to your TRAP! Never lose or forget it. (Replaces Terminal Swivel)
Uses your Traps Frame End inserted into one of the appropriate slots to stabilize your trap, providing a VERY stable trap.
Can be used as an 'adjustable' height set on 3/8" Rods.
No Rods? No problem! Can be attached horizontally or vertically to virtually any object.
- Simply wire, nail, screw, staple, etc. the bracket firmly in place, set your trap and go!
- Some examples are a Stick, Bamboo, Stake, Log, Rock, Float, etc.
Multiple holes and slots for a number of ways to securing with Wire, Screws, Nails, etc.
Can be welded to a Stake, Lag Bolt, Railroad Plate, etc.
Small and non-intrusive

There are no reviews for this item yet.

Brand:

J3 Outdoors

Weight:

1.02 lbs./Dozen (.43 Kg) 1.35 oz. ea. (38 g)

Dimensions:

2"L x 1.25"W

Description

Click here for Product Instructions

Details

Features:

Multi Use - Stabilizer, Stake Swivel and Slide/Drowner Lock
Stabilizes Coil, Jump and Long Spring Foot Hold Traps -Designed for 1.5 foot holds and smaller

Note:Fits Trap Frame Ends less than .129 thickness and .75 width (almost all 1.5 traps). Larger frame ends will work with minor filing.

Works on 3/8" rods (fiberglass or steel)
Weighs 1.36 Oz. and measures roughly 2.5"x1"
Made in USA
Improves efficiency and reduces overall costs.
Always ATTACHED to your TRAP! Never lose or forget it. (Replaces Terminal Swivel)
Uses your Traps Frame End inserted into one of the appropriate slots to stabilize your trap, providing a VERY stable trap.
Can be used as an 'adjustable' height set on 3/8" Rods.
No Rods? No problem! Can be attached horizontally or vertically to virtually any object.
- Simply wire, nail, screw, staple, etc. the bracket firmly in place, set your trap and go!
- Some examples are a Stick, Bamboo, Stake, Log, Rock, Float, etc.
Multiple holes and slots for a number of ways to securing with Wire, Screws, Nails, etc.
Can be welded to a Stake, Lag Bolt, Railroad Plate, etc.
Small and non-intrusive