Material Safety Data Sheet

Product Name:

Rejex-it® Fog Force™

HMIS Codes:

H F R P

Product Code:

   

1 1 0 B

Section I – Manufacturer Identification

 

Manufactured For:

Ceannard Inc

Address:

PO Box 2404 - Gastonia, NC 28054

Emergency Phone:

1-800-892-0099

Information Phone:

866-532-4737

Prepared By:

MSDS Coordinator

Date Revised:

March 1, 2006

Section II – Hazardous Ingredients/SARA III Information

Hazardous Components

Occupational Exposure Limits

Component

CAS Number

OSHA PEL

ACGIH TLV

Weight Percent

Methyl Anthranilate

134-20-3

Not assigned

Not assigned

40.0%

Others

 

Not assigned

Not assigned

60.0%

***No reportable quantities of hazardous ingredients are present per OSHA 29 CFR 1910.1200***

***No toxic chemical(s) subject to the reporting requirements of section 313 of Title III and of 40 CFR 372 are present***

Section III - Physical/Chemical Characteristics

Boiling Point:

208° C, 406° F

Freezing Point:

-4° C

Vapor Density:

NA

Solubility in Water:

Insoluble

Vapor Pressure at 25° C:

5.5 mm Hg

Evaporation Rate:

NA

Specific Gravity at 25° C:

~0.95

Appearance and Odor:

Clear blue liquid, grape-like odor.

Section IV - Fire and Explosion Hazard Data:

     

Flash Point:

248° F

Method Used:

TCC

Flammable Limits in Air by Volume:

NA

Lower:

NA

Upper:

NA

Extinguishing Media:

Dry chemical, foam.

Fire Fighting Precautions & Hazards:

Fire fighters should wear butyl rubber boots, gloves, and body suit and a

NIOSH/MSHA self-contained breathing apparatus. Water may be used to cool closed containers to prevent pressure build-up and/or explosion when exposed to extreme heat.

Unusual Fire and Explosion Hazards:

Not a fire or explosion hazard when stored under normal conditions. Closed

containers may explode (due to the build-up of pressure) when exposed to extreme heat.

Section V – Reactivity Data

Stability:

Stable

Conditions to Avoid:

Extremes in temperature.

Incompatibility (Materials to Avoid):

Oxidizing agents.

Hazardous Decomposition Products:

When involved in a fire, burning may evolve noxious fumes which may

include carbon monoxide, carbon dioxide, nitrous oxides, acetic acid, or other toxic compounds depending on the chemical composition and combustion conditions.

 

Hazardous Polymerization:

Will not occur.

Section VI - Health Hazard Data

Inhalation Health Risks and Symptoms of Exposure:

Prolonged inhalation may lead to respiratory tract

irritation.

Skin and Eye Contact Health Risks and Symptoms of Exposure:

Prolonged or repeated contact may result in

mechanical irritation.

Skin Absorption Health risks and Symptoms of Exposure:

None expected.

Ingestion Health Risks and Symptoms of Exposure:

Ingestion of large quantities may be harmful.

Health Hazards (acute and chronic):

None known. The materials in this product are designated by the U.S. Food

Drug Administration as Generally Recognized As Safe (GRAS, 21 CFR 182.60) for unlimited use as human food/fragrance additives.

Carcinogenicity

NTP?

No

IARC Monographs?

No

   
   

Section VI - Health Hazard Data (Continued)

Existing Medical Conditions Generally Aggravated By Exposure:

May provoke asthmatic response in persons

with asthma who are sensitive to airway irritants.

 

Emergency and First Aid Procedures:

 

Eyes:

Flush with flowing water for at least 15 minutes. Call a physician.

Skin:

Wash affected area with soap and water. If irritation develops consult a physician. Remove and launder

contaminated clothing before reuse.

Inhalation:

If difficulty in breathing occurs, move to fresh air. Get immediate medical attention.

Ingestion:

Get immediate medical attention. Unless advised otherwise, dilute with water and induce vomiting.

 

Section VII – Precautions for Safe Handling and Use

Steps to be Taken in Case Material is Released or Spilled:

Contain the spill to prevent a large discharge to

surface streams or storm sewers. Since landfill operations will not accept liquid waste, allow to dry if possible before

collecting for disposal. An absorbent material would aid in cleaning up a liquid spill. If liquid cleanup is necessary, collect

in drums, buckets, or other containers.

Waste Disposal Method:

Spray mixture or rinse water that cannot be used according to label instructions must be

disposed of according to Federal or approved State procedures. Waste resulting from the use of this product may be disposed of on site or at an approved waste disposal facility.

Precautions to be Taken in Handling and Storing:

Store only in original container, in a dry place, inaccessible to

Children, pets, and domestic animals. Store apart from pesticides, fertilizers, food, or feed that may cause cross-contamination from odor.

Other Precautions:

Avoid excessive exposure. Keep away from open flames. Keep container closed when not in use.

Use in ventilated areas only.

 

Section VIII - Control Measures

Respiratory:

If excessive vapors or mists are generated, wear NIOSH/MSHA approved organic vapor/mist respirator.

Ventilation:

Use local exhaust to control excessive vapors/mists. If applicable, proper personal protection is a

NIOSH/MSHA approved respirator.

Clothing:

Gloves, coveralls, apron, boots as necessary to prevent skin contact as needed.

Eye:

Chemical goggles; wear face shield if splashing hazard exists.

Other:

Open wounds or skin surface disruptions should be covered with a chemical resistant patch to minimize

absorption risks. Clean clothing should be worn daily to avoid possible long-term build up of the product leading to chronic overexposure.

 

Section IX - Shipping and Labeling Information

D.O.T. Shipping Data:

Not regulated.

D.O.T. Hazard Classification

NA

D.O.T. Labels Required:

NA

D.O.T. Identification

NA

Regulatory Status: Registered for use as a bird aversion agent under Federal Insecticide, Fungicide & Rodenticide Act (FIFRA) administered by the United States Environmental Protection Agency (US EPA); meets the criteria for "reduced risk" (Pesticide Regulation Notice 93-9). EPA Reg. No. 58035-7. EPA EST No. 071638-OH-001

 

Section X - Disclaimer

The opinions expressed herein are those of qualified persons with Ceannard, Inc. We believe the information contained here is current as of the date of this Material Safety Data Sheet. Since the use of this product is not within the control of Ceannard, Inc., it is the user’s obligation to determine a safe end use of this product.